[Rohit Patil]

#148

Hi Stone,

We are working on one of the medical devices (student project) for which I am using an STM32F4 DISC board. The purpose of this product is to obtain data from waveform displays on sensors (ECG) and LCDS.

Therefore, we require touchless and touch LCDS of different sizes (10 to 15 inches).Please provide the following information:

1) Touchless and touchless display usability (10 to 15 inch size)

2) Cost per monitor:

3) Whether it is suitable for STM Board

5) Communication interface?:

[Nigel]

#149

Hi Mr. Rohit:

Thanks very much for contacting us. This is Nigel from STONE TECH.

About your questions:

 

1) Availability of Without Touch and Touch Display (10 to 15 inch size)

–Yes we have 10.1, 10.4, 12.1 and 15.1 inches available. I would suggest you to consider 10.1 inches, regarding to the effective-cost ratio.

2) Cost of every Display:

–I’ll send the datasheet and the quotation to your email
3)Is it suited for to interface with STM Board

–Yes. Our display is working with UART interface, so RS232/TTL will be OK. And we will also send you a DEMO project based on STM32, so you can do the test with it.
5) communication?:

–The communication protocol is a customized command set. You can check the details in the development guide.

Please let me know if you have any questions. You can bring it here or send me email

[Author]

Posts