[June]

#2354

Hello,,

I have a 7″ stone display (STVC070WT-01) and i can’t write text on it.

The comunication between my mcu and the display it’s ok, because I can read the key value return, and I can write data variables or change the interfaces.

But When I try to write some text it doesn’t work

I have a TextVariable with 0x03fd memory address and i try to write something with that data frame that I find in the documentation

0xA5, 0x5A, 0x0A, 0x82, 0x03, 0xfd, 0x56, 0x49, 0x45, 0x57, 0x31, 0x32, 0x33

But don’t do nothing

Regards,

 

[Fiona Liu]

#2364

Hi,

It is written in the manual that you need a text terminator, please try adding FF FF at the end of the command and modifying the data length

If you still have problems, please contact me again.

[June]

#2371

Thanks for the info.
I dont see that in the user manual.

I try it, and the text appear in the display, but.. It give me an error
Error Code=00 00 00 11
ff ff

[June]

#2372

Ok now it works fine.
I make a mistake with the byte pack, I forget to count well.

[Author]

Posts