I couldn't communicate with the STONE LCD module using UART - Official STONE/ User Forum

I couldn't communicate with the STONE LCD module using UARTcaesaran2020-10-15T12:38:53+08:00

Author
Posts
Nigel
Member
@nigel
2020-10-26 at 16:54
Post count: 55
#185
Hi Caesaran:
We have the serial port debug function in the TOOL 2019 software. It will allows you to set the baudrate and all other parameters directly.

And please also confirm if you have installed the USB driver properly:
https://www.stoneitech.com/media/upload/Download/Software%20%26%20Driver/Driver%20for%20USB2.0%20to%20RS232%20converter.rar
Author
Posts

You must be logged in to reply to this topic.