Viewing 3 reply threads
  • Author
    Posts
    • BillSBillS
      Participant
      @bills
      2020-12-08 at 16:45
      Post count: 4
      #390

      How can I make a dynamic power display module for my serial screen, which is a c-series 7″?

    • Fiona LiuFiona Liu
      Keymaster
      @bancroft
      2020-12-08 at 17:05
      Post count: 371
      #392

      The control animates a continuous loop of icons in a certain area of the display, with a VGUS refresh interval (about 100 msec). The variable has only two values: one for the start value and one for the stop value. When the 0x82 instruction writes the start value to the variable, the animation starts; when the stop value is written, the animation stops.

    • BillSBillS
      Participant
      @bills
      2020-12-10 at 14:35
      Post count: 4
      #423

      Are you an official and can you tell us more about it?

    • Anonymous
      Inactive
      2020-12-15 at 23:27
      Post count: 1
      #486

      Hi…i associated one toward the beginning of today to my Teensy. First I had simply pixels and now I have nothing appearing. These are the pins I utilized and I gave various blends a shot the screen

      20 DISP_SS

      13 DISP_SCK

      11 DISP_MOSI

      I accepted since the past LCD that I associated straightforwardly to the Teensy didn’t blow the Teensy this showcase wouldn’t so I just associated the force straightforwardly to the Teensy. 3.3V from Teensy to 3.3V-5V of the showcase and afterward 3.3V from Teensy to the 3.3V of the presentation.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.