Viewing 3 reply threads
  • Author
    Posts
    • jose rodriguezjose rodriguez
      Participant
      @zoder
      Post count: 4

      buena tarde a todos

      estamos haciendo un proyecto con pantallas y en especial una stone de 7 pulgadas

      me enfrento a un gran problema jejeje

      ya que las compre por calidad y presio pero no estoy muy seguro de como programarlas

      ya tengo mi programacion en MicroC de sensor de temperatura y humedad pero no lo que no se es como mandar los datos a la pantalla

       

      si me podrian ayudar  se los agradece mucho

       

      saludos

    • Nigel TianNigel
      Member
      @nigel
      Post count: 55

      Dear Jose:

      Thanks for sharing the information. We have made many demos and instructions for the basic communication and simple programming. I think the following article will help you:

      Basic command communication:

      https://www.stoneitech.com/application/application-note/how-to-use-commands-to-communicate-with-the-stone-display.html

      Demos for sensor:

      https://www.stoneitech.com/news/sharing/arduino-lcd-display-project.html

      https://www.stoneitech.com/news/sharing/smart-home-lcd-screen-module.html

      https://www.stoneitech.com/news/sharing/tft-lcd-module-acceleration-gyroscope-sensor.html

       

      I hope all this information could give you assistance. Please let me know if you need anything else from us.

    • jose rodriguezjose rodriguez
      Participant
      @zoder
      Post count: 4

      Que tal muchas gracias estoy ocupando MicroC y PIC16f877A

      estoy revisando los ejemplos tendra algun ejemplo que no sea arduino y ccs  ocupo c

       

      saludos

      • Nigel TianNigel
        Member
        @nigel
        Post count: 55

        We also have some other demos based on STM32 and ESP32. You can directly search the keyword STM32 or ESP32 on the website.

        There are too many kinds of controller so we haven’t made all the demos for them. But the basic control logic is the same. Please check and let me know if this would help.

    • jose rodriguezjose rodriguez
      Participant
      @zoder
      Post count: 4

      que tal buen dia

      se puede ocupar la pantalla conectarla directo al arduino sin el max3232

       

      tengo el siguiente problema que cuando lo simulo en la pc funciona bien pero en la pantalla no hace nada

       

      saludos

      • Nigel TianNigel
        Member
        @nigel
        Post count: 55

        Can you describe which part of the function you have only worked on the PC but not on display?

        It would be more helpful if you can send me the project file you have so I can check for you.

Viewing 3 reply threads
  • You must be logged in to reply to this topic.